Abrasion lining
To protect the crusher inlet from damage, the housing is completely covered with extremely wear-resistant genuine KLEEMANN plates.
KLEEMANN Resistance Steel (KRS) is available in three quality levels. KRS-COMP plates, which can withstand a hardness of up to 430 HV and exhibit excellent impact resistance, are particularly suitable for materials with very a low level of abrasiveness, such as limestone, or for recycling building rubble and concrete. For rock with a medium degree of abrasiveness and recycling operations,
KRS-XPERT is suitable for materials with a hardness of up to 530 HV.
KRS-XTRA plates, designed for materials with a high level of abrasiveness, have a significantly longer service life. These plates, which have a wear layer that is 10 mm thick, can withstand hardnesses of up to 740 HV.
KLEEMANN Resistance Steel (KRS) is available in three quality levels. KRS-COMP plates, which can withstand a hardness of up to 430 HV and exhibit excellent impact resistance, are particularly suitable for materials with very a low level of abrasiveness, such as limestone, or for recycling building rubble and concrete. For rock with a medium degree of abrasiveness and recycling operations,
KRS-XPERT is suitable for materials with a hardness of up to 530 HV.
KRS-XTRA plates, designed for materials with a high level of abrasiveness, have a significantly longer service life. These plates, which have a wear layer that is 10 mm thick, can withstand hardnesses of up to 740 HV.
221
Products found
Chain curtain
Genuine KLEEMANN chain curtains are particularly wear-resistant and, in combination with rubber curtains, ensure that neither material nor dust can escape from the crusher housing.
| KLEEMANN | MR 100 R | K012 | 1 - 9999 |
| for crusher inlet | 18 pc. |
Quantity:
| KLEEMANN | MR 100 Z | K013 | 1 - 9999 |
| for crusher inlet | 18 pc. |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| for crusher inlet | 18 pc. |
Quantity:
| KLEEMANN | MR 110 Z EVO | K017 | 1 - 9999 |
| for crusher inlet | 18 pc. |
Quantity:
| KLEEMANN | MR 110 Z EVO2 | K018 | 1 - 9999 |
| for crusher inlet | 18 pc. |
Quantity:
| KLEEMANN | MR 110 Zi EVO2 | K019 | 1 - 9999 |
| for crusher inlet | 18 pc. |
Quantity:
| KLEEMANN | MR 122 Z | K062 | 1 - 9999 |
| for crusher inlet | 16 pc. |
Quantity:
| KLEEMANN | MR 122 Z | K062 | 1 - 9999 |
| for crusher inlet | 20 pc. |
Quantity:
| KLEEMANN | MR 130 R | K023 | 1 - 199 |
| for crusher inlet | 21 pc. |
Quantity:
| KLEEMANN | MR 130 R EVO | K023 | 200 - 9999 |
| for crusher inlet | 21 pc. |
Quantity:
Cheek plates
Genuine KLEEMANN cheek plates are located to the right and left of the crushing jaws. They are made of highly wear-resistant steel to protect the crusher housing. The practical design of the cheek plates allows them to be mounted without bolts, thus saving valuable disassembly and assembly time.
| KLEEMANN | MC 100 R | K001 | 1 - 9999 |
| KRS-COMP | left |
Quantity:
| KLEEMANN | MC 100 R | K001 | 1 - 9999 |
| KRS-COMP | right |
Quantity:
| KLEEMANN | MC 100 R | K001 | 1 - 9999 |
| KRS-XPERT | right |
Quantity:
| KLEEMANN | MC 100 R | K001 | 1 - 9999 |
| KRS-XPERT | left |
Quantity:
| KLEEMANN | MC 100 R EVO | K002 | 1 - 9999 |
| KRS-XTRA | left; right |
Quantity:
| KLEEMANN | MC 100 R EVO | K002 | 1 - 9999 |
| KRS-COMP | left; right |
Quantity:
| KLEEMANN | MC 100 R EVO | K002 | 1 - 9999 |
| KRS-XPERT | left; right |
Quantity:
| KLEEMANN | MC 100 Ri EVO | K011 | 1 - 9999 |
| KRS-XTRA | left; right |
Quantity:
| KLEEMANN | MC 100 Ri EVO | K011 | 1 - 9999 |
| KRS-XPERT | left; right |
Quantity:
| KLEEMANN | MC 100 Ri EVO | K011 | 1 - 9999 |
| KRS-COMP | left; right |
Quantity:
Rubber curtain
Genuine KLEEMANN fibre-reinforced rubber curtains are attached to the crusher infeed to prevent material and dust from escaping.
| KLEEMANN | MR 100 R | K012 | 1 - 9999 |
| for crusher inlet | 9 pc. |
Quantity:
| KLEEMANN | MR 100 Z | K013 | 1 - 9999 |
| for crusher inlet | 9 pc. |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| for crusher inlet | 10 pc. |
Quantity:
| KLEEMANN | MR 110 Z EVO | K017 | 1 - 9999 |
| for crusher inlet | 10 pc. |
Quantity:
| KLEEMANN | MR 110 Z EVO2 | K018 | 1 - 9999 |
| for crusher inlet | 10 pc. |
Quantity:
| KLEEMANN | MR 110 Zi EVO2 | K019 | 1 - 9999 |
| for crusher inlet | 10 pc. |
Quantity:
| KLEEMANN | MR 122 Z | K062 | 1 - 9999 |
| for crusher inlet | 14 pc. |
Quantity:
| KLEEMANN | MR 130 R | K023 | 1 - 199 |
| for crusher inlet | 14 pc. |
Quantity:
| KLEEMANN | MR 130 R EVO | K023 | 200 - 9999 |
| for crusher inlet | 13 pc. |
Quantity:
| KLEEMANN | MR 130 Z | K024 | 1 - 299 |
| for crusher inlet | 14 pc. |
Quantity:
Wear plates
Genuine KLEEMANN wear plates protect the high-quality crusher housing from damage.
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-COMP | square | 250 x 250 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-COMP | rectangular | 250 x 122.5 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-XPERT | triangular | 246 x 246 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-XPERT | rectangular | 250 x 122.5 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-XPERT | square | 250 x 250 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-XTRA | triangular | 246 x 246 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-XTRA | rectangular | 250 x 122.5 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-XTRA | square | 250 x 250 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 R EVO | K016 | 1 - 9999 |
| KRS-COMP | triangular | 246 x 246 x 20 cm | for crusher housing |
Quantity:
| KLEEMANN | MR 110 Z EVO | K017 | 1 - 9999 |
| KRS-COMP | square | 250 x 250 x 20 cm | for crusher housing |
Quantity:
Due to possible technical changes, always refer to the information in the instruction manual.