Current special campaigns
Crushing tools for cone crushers
Quickly and easily buy genuine crushing tools for KLEEMANN cone crushers online.
The KX series of cone crushers are typically used as secondary and tertiary crushers. In this case, the material entering the crusher is crushed between the rigid crushing shell and the moving crushing cone.
To achieve consistently high performance and a long service life, the entire wear surface of the crushing tool must be used.
This can only be achieved if the crushing tools are selected to match the size of the material entering the crusher and the desired final product.
To achieve consistently high performance and a long service life, the entire wear surface of the crushing tool must be used.
This can only be achieved if the crushing tools are selected to match the size of the material entering the crusher and the desired final product.
361
Products found
Erklärung zum Diagram
Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.
Crushing shells and crushing cones
The crushing tools must achieve an optimum crushing result and a long service life, even at a high degree of utilisation. This is why different crushing tool combinations, material thicknesses and manganese steel qualities are available from KLEEMANN for varying application conditions.
| KLEEMANN | MCO 110 | K038 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Coarse |
| Version | S-CONE C 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 25 mm - 45 mm |
| Minimale Spaltweite bis [mm] | 45 mm |
| Minimale Spaltweite von [mm] | 25 mm |
| Feed opening | 220 mm - 240 mm |
| Einlauföffnung bis [mm] | 240 mm |
| Einlauföffnung von [mm] | 220 mm |
| KLEEMANN | MCO 110 | K038 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Medium |
| Version | S-CONE M 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 19 mm - 38 mm |
| Minimale Spaltweite bis [mm] | 38 mm |
| Minimale Spaltweite von [mm] | 19 mm |
| Feed opening | 173 mm - 190 mm |
| Einlauföffnung bis [mm] | 190 mm |
| Einlauföffnung von [mm] | 173 mm |
| KLEEMANN | MCO 110 | K038 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Fine |
| Version | SH-CONE F 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 10 mm - 19 mm |
| Minimale Spaltweite bis [mm] | 19 mm |
| Minimale Spaltweite von [mm] | 10 mm |
| Feed opening | 52 mm - 62 mm |
| Einlauföffnung bis [mm] | 62 mm |
| Einlauföffnung von [mm] | 52 mm |
| KLEEMANN | MCO 110 | K038 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Medium |
| Version | SH-CONE M 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 10 mm - 22 mm |
| Minimale Spaltweite bis [mm] | 22 mm |
| Minimale Spaltweite von [mm] | 10 mm |
| Feed opening | 81 mm - 93 mm |
| Einlauföffnung bis [mm] | 93 mm |
| Einlauföffnung von [mm] | 81 mm |
| KLEEMANN | MCO 110 | K038 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Coarse |
| Version | SH-CONE C 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 13 mm - 25 mm |
| Minimale Spaltweite bis [mm] | 25 mm |
| Minimale Spaltweite von [mm] | 13 mm |
| Feed opening | 102 mm - 114 mm |
| Einlauföffnung bis [mm] | 114 mm |
| Einlauföffnung von [mm] | 102 mm |
| KLEEMANN | MCO 110 | K038 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Fine |
| Version | S-CONE F 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 16 mm - 32 mm |
| Minimale Spaltweite bis [mm] | 32 mm |
| Minimale Spaltweite von [mm] | 16 mm |
| Feed opening | 131 mm - 147 mm |
| Einlauföffnung bis [mm] | 147 mm |
| Einlauföffnung von [mm] | 131 mm |
| KLEEMANN | MCO 110 | K038 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Coarse |
| Version | SH-CONE C 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 13 mm - 25 mm |
| Minimale Spaltweite bis [mm] | 25 mm |
| Minimale Spaltweite von [mm] | 13 mm |
| Feed opening | 102 mm - 114 mm |
| Einlauföffnung bis [mm] | 114 mm |
| Einlauföffnung von [mm] | 102 mm |
| KLEEMANN | MCO 11 SX | K041 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Coarse |
| Version | S-CONE C 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 25 mm - 45 mm |
| Minimale Spaltweite bis [mm] | 45 mm |
| Minimale Spaltweite von [mm] | 25 mm |
| Feed opening | 220 mm - 240 mm |
| Einlauföffnung bis [mm] | 240 mm |
| Einlauföffnung von [mm] | 220 mm |
| KLEEMANN | MCO 11 SX | K041 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Medium |
| Version | S-CONE M 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 19 mm - 38 mm |
| Minimale Spaltweite bis [mm] | 38 mm |
| Minimale Spaltweite von [mm] | 19 mm |
| Feed opening | 173 mm - 190 mm |
| Einlauföffnung bis [mm] | 190 mm |
| Einlauföffnung von [mm] | 173 mm |
| KLEEMANN | MCO 11 SX | K041 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Coarse |
| Version | SH-CONE C 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX300 |
| Minimum gap width | 13 mm - 25 mm |
| Minimale Spaltweite bis [mm] | 25 mm |
| Minimale Spaltweite von [mm] | 13 mm |
| Feed opening | 102 mm - 114 mm |
| Einlauföffnung bis [mm] | 114 mm |
| Einlauföffnung von [mm] | 102 mm |
Due to possible technical changes, always refer to the information in the instruction manual.