Current special campaigns
Crushing tools for cone crushers
Quickly and easily buy genuine crushing tools for KLEEMANN cone crushers online.
The KX series of cone crushers are typically used as secondary and tertiary crushers. In this case, the material entering the crusher is crushed between the rigid crushing shell and the moving crushing cone.
To achieve consistently high performance and a long service life, the entire wear surface of the crushing tool must be used.
This can only be achieved if the crushing tools are selected to match the size of the material entering the crusher and the desired final product.
To achieve consistently high performance and a long service life, the entire wear surface of the crushing tool must be used.
This can only be achieved if the crushing tools are selected to match the size of the material entering the crusher and the desired final product.
382
Products found
Erklärung zum Diagram
Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.
Crushing shells and crushing cones
The crushing tools must achieve an optimum crushing result and a long service life, even at a high degree of utilisation. This is why different crushing tool combinations, material thicknesses and manganese steel qualities are available from KLEEMANN for varying application conditions.
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Fine; Medium; Coarse |
| Version | SH-CONE 20 |
| Manganese version Content | 20.3 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 10 mm - 25 mm |
| Minimale Spaltweite bis [mm] | 25 mm |
| Minimale Spaltweite von [mm] | 10 mm |
| Feed opening | 71 mm - 142 mm |
| Einlauföffnung bis [mm] | 142 mm |
| Einlauföffnung von [mm] | 71 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Fine; Medium; Coarse |
| Version | SH-CONE 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 10 mm - 25 mm |
| Minimale Spaltweite bis [mm] | 25 mm |
| Minimale Spaltweite von [mm] | 10 mm |
| Feed opening | 71 mm - 142 mm |
| Einlauföffnung bis [mm] | 142 mm |
| Einlauföffnung von [mm] | 71 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Fine; Medium; Coarse |
| Version | S-CONE 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 16 mm - 45 mm |
| Minimale Spaltweite bis [mm] | 45 mm |
| Minimale Spaltweite von [mm] | 16 mm |
| Feed opening | 116 mm - 199 mm |
| Einlauföffnung bis [mm] | 199 mm |
| Einlauföffnung von [mm] | 116 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Fine; Medium; Coarse |
| Version | S-CONE 20 |
| Manganese version Content | 20.3 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 16 mm - 45 mm |
| Minimale Spaltweite bis [mm] | 45 mm |
| Minimale Spaltweite von [mm] | 16 mm |
| Feed opening | 116 mm - 199 mm |
| Einlauföffnung bis [mm] | 199 mm |
| Einlauföffnung von [mm] | 116 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Medium |
| Version | S-CONE M 20 |
| Manganese version Content | 20.3 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 19 mm - 38 mm |
| Minimale Spaltweite bis [mm] | 38 mm |
| Minimale Spaltweite von [mm] | 19 mm |
| Feed opening | 138 mm - 157 mm |
| Einlauföffnung bis [mm] | 157 mm |
| Einlauföffnung von [mm] | 138 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Coarse |
| Version | SH-CONE C 20 |
| Manganese version Content | 20.3 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 13 mm - 25 mm |
| Minimale Spaltweite bis [mm] | 25 mm |
| Minimale Spaltweite von [mm] | 13 mm |
| Feed opening | 130 mm - 142 mm |
| Einlauföffnung bis [mm] | 142 mm |
| Einlauföffnung von [mm] | 130 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Medium |
| Version | SH-CONE M 20 |
| Manganese version Content | 20.3 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 10 mm - 22 mm |
| Minimale Spaltweite bis [mm] | 22 mm |
| Minimale Spaltweite von [mm] | 10 mm |
| Feed opening | 99 mm - 111 mm |
| Einlauföffnung bis [mm] | 111 mm |
| Einlauföffnung von [mm] | 99 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Fine |
| Version | SH-CONE F 20 |
| Manganese version Content | 20.3 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 10 mm - 19 mm |
| Minimale Spaltweite bis [mm] | 19 mm |
| Minimale Spaltweite von [mm] | 10 mm |
| Feed opening | 71 mm - 80 mm |
| Einlauföffnung bis [mm] | 80 mm |
| Einlauföffnung von [mm] | 71 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Short Head |
| Application | Medium |
| Version | SH-CONE M 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 10 mm - 22 mm |
| Minimale Spaltweite bis [mm] | 22 mm |
| Minimale Spaltweite von [mm] | 10 mm |
| Feed opening | 99 mm - 111 mm |
| Einlauföffnung bis [mm] | 111 mm |
| Einlauföffnung von [mm] | 99 mm |
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| Crushing tool type | Standard |
| Application | Fine |
| Version | S-CONE F 18 |
| Manganese version Content | 18.2 MnCr |
| Tool type | KX200; KX250 |
| Minimum gap width | 16 mm - 32 mm |
| Minimale Spaltweite bis [mm] | 32 mm |
| Minimale Spaltweite von [mm] | 16 mm |
| Feed opening | 116 mm - 131 mm |
| Einlauföffnung bis [mm] | 131 mm |
| Einlauföffnung von [mm] | 116 mm |
Due to possible technical changes, always refer to the information in the instruction manual.