Always be on the safe side – with products from our range of sprinkling system parts: our reliable filters, high-quality pumps, spray nozzles, seals and couplings guarantee you trouble-free operations on hot asphalt .
When using the water pump, it is advisable to switch to the back-up pump every now and again to prevent pump failures caused by internal corrosion. If there is a risk of frost, you mustn’t forget to drain the pump at the end of the day’s work. Whenever necessary, the complete sprinkler bar assembly can be removed quickly and easily with the help of the quick-change system.
Check whether the water nozzles are working properly every day. In the case of blocked nozzles or nozzles with an irregular spray pattern, it is advisable to replace them as soon as you have the time.
HAMM offers a number of kits designed to make maintenance and the replacement of parts much easier. These kits contain all the most important replacement parts.
Kits with genuine HAMM parts are particularly compact and take up very little space. This means that they can always be carried onboard the machine and allow, for example, the replacement of worn spray nozzles within just a couple of minutes.
Use only clean water – this prevents clogging of water filters and unnecessary wear on pump and nozzles and ensures correct functioning of the sprinkling system at all times. Clean the filters in the sprinkling system at regular intervals to prevent premature pump failure. Nozzles blocked with asphalt residues should be cleaned or replaced as soon as possible.
Please note that unapproved water additives and / or separating agents can cause irreparable damage to the pump membrane and nozzles.