Milling drum housings
Order and buy genuine scrapers and wear protection segments for WIRTGEN milling drum housings online.
In addition to the wear protection segments to protect the side plates, genuine WIRTGEN tungsten carbide scrapers on the rear rotor plate ensure that as little milled material as possible remains on the milled surface when the material is transported away via the conveyor unit system. This results in less cleaning work and a levelled milled surface. Thanks to perfectly harmonised components, milling drum housings from WIRTGEN offer maximum reliability and minimum machine downtimes in day-to-day operations on the construction site.
Scraper
Original WIRTGEN scrapers not only seal the milling chamber so that the milled material can be conveyed away cleanly, but also smooth the milled surface. Type 1 scrapers are optimised to slide as smoothly as possible over the milled surface when scraping. In contrast, the modified shape, profile and position of the carbide in the type 2 version leads to a stronger scraping effect.
| WIRTGEN | W 500 | 0605 | 1 - 9999 |
| Type 1 | 500 mm |
| WIRTGEN | W 50 | 0805 | 1 - 9999 |
| Type 1 | 500 mm |
| WIRTGEN | W 50 | 1005 | 1 - 9999 |
| Type 1 | 500 mm |
| WIRTGEN | W 50 DC | 0905 | 1 - 9999 |
| Type 1 | 500 mm |
| WIRTGEN | W 50 DCi | 1205 | 1 - 9999 |
| Type 1 | 500 mm |
| WIRTGEN | W 50 R | 1405 | 1 - 9999 |
| Type 1 | 600 mm |
| WIRTGEN | W 50 R | 1405 | 1 - 9999 |
| Type 1 | 500 mm |
| WIRTGEN | W 50 Ri | 1505 | 1 - 9999 |
| Type 1 | 600 mm |
| WIRTGEN | W 50 Ri | 1505 | 1 - 9999 |
| Type 1 | 500 mm |
| WIRTGEN | W 50 H | 1305 | 1 - 9999 |
| Type 1 | 500 mm |
Wear protection segments
WIRTGEN wear protection segments are made of particularly wear-resistant material. They not only protect the milling drum housing from normal wear and tear, but are also easy to replace.
| WIRTGEN | W 50 R | 1405 | 1 - 9999 |
|
4 pc. | Milling width: 500 mm 4 pc. | Milling width: 600 mm |
| WIRTGEN | W 50 R | 1405 | 1 - 9999 |
| welded |
left | Milling width: 500 mm left | Milling width: 600 mm |
| WIRTGEN | W 60 R | 1405 | 1 - 9999 |
| welded |
left | Milling width: 500 mm left | Milling width: 600 mm |
| WIRTGEN | W 50 Ri | 1505 | 1 - 9999 |
|
4 pc. | Milling width: 500 mm 4 pc. | Milling width: 600 mm |
| WIRTGEN | W 50 Ri | 1505 | 1 - 9999 |
| welded |
left | Milling width: 500 mm left | Milling width: 600 mm |
| WIRTGEN | W 60 Ri | 1505 | 1 - 9999 |
| welded |
left | Milling width: 500 mm left | Milling width: 600 mm |
| WIRTGEN | W 100 CF | 1710 | 1 - 9999 |
| 50 mm | 490 mm |
2 pc. | Milling width: 1000 mm 2 pc. | Milling width: 1200 mm 2 pc. | Milling width: 1300 mm |
| WIRTGEN | W 100 CF | 1710 | 1 - 9999 |
| welded |
right | Milling width: 1000 mm right | Milling width: 1200 mm right | Milling width: 1300 mm |
| WIRTGEN | W 100 CF | 1710 | 1 - 9999 |
| welded | left | Milling width: 1000 mm |
| WIRTGEN | W 100 CF | 1710 | 1 - 9999 |
| welded |
left | Milling width: 1200 mm left | Milling width: 1300 mm |
Due to possible technical changes, always refer to the information in the instruction manual.
Campaigns are not available in all countries – please contact your local sales and service organisation if you have any questions.