Abrasion lining

Abrasion lining

To protect the crusher inlet from damage, the housing is completely covered with extremely wear-resistant genuine KLEEMANN plates.

KLEEMANN Resistance Steel (KRS) is available in three quality levels. KRS-COMP plates, which can withstand a hardness of up to 430 HV and exhibit excellent impact resistance, are particularly suitable for materials with very a low level of abrasiveness, such as limestone, or for recycling building rubble and concrete. For rock with a medium degree of abrasiveness and recycling operations,

KRS-XPERT is suitable for materials with a hardness of up to 530 HV.

KRS-XTRA plates, designed for materials with a high level of abrasiveness, have a significantly longer service life. These plates, which have a wear layer that is 10 mm thick, can withstand hardnesses of up to 740 HV.
Abrasion lining
103 Products found

Chain curtain

Genuine KLEEMANN chain curtains are particularly wear-resistant and, in combination with rubber curtains, ensure that neither material nor dust can escape from the crusher housing.

Chain curtain
KLEEMANN MR 100 R K012 1 - 9999
for crusher inlet 18 pc.
Quantity:
KLEEMANN MR 100 Z K013 1 - 9999
for crusher inlet 18 pc.
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
for crusher inlet 18 pc.
Quantity:
KLEEMANN MR 110 Z EVO K017 1 - 9999
for crusher inlet 18 pc.
Quantity:
KLEEMANN MR 110 Z EVO2 K018 1 - 9999
for crusher inlet 18 pc.
Quantity:
KLEEMANN MR 110 Zi EVO2 K019 1 - 9999
for crusher inlet 18 pc.
Quantity:
KLEEMANN MR 122 PRO K062 1 - 9999
for crusher inlet 16 pc.
Quantity:
KLEEMANN MR 122 PRO K062 1 - 9999
for crusher inlet 20 pc.
Quantity:
KLEEMANN MR 130 R K023 1 - 199
for crusher inlet 21 pc.
Quantity:
KLEEMANN MR 130 R EVO K023 200 - 9999
for crusher inlet 21 pc.
Quantity:

Rubber curtain

Genuine KLEEMANN fibre-reinforced rubber curtains are attached to the crusher infeed to prevent material and dust from escaping.

Rubber curtain
KLEEMANN MR 100 R K012 1 - 9999
for crusher inlet 9 pc.
Quantity:
KLEEMANN MR 100 Z K013 1 - 9999
for crusher inlet 9 pc.
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
for crusher inlet 10 pc.
Quantity:
KLEEMANN MR 110 Z EVO K017 1 - 9999
for crusher inlet 10 pc.
Quantity:
KLEEMANN MR 110 Z EVO2 K018 1 - 9999
for crusher inlet 10 pc.
Quantity:
KLEEMANN MR 110 Zi EVO2 K019 1 - 9999
for crusher inlet 10 pc.
Quantity:
KLEEMANN MR 122 PRO K062 1 - 9999
for crusher inlet 14 pc.
Quantity:
KLEEMANN MR 130 R K023 1 - 199
for crusher inlet 14 pc.
Quantity:
KLEEMANN MR 130 R EVO K023 200 - 9999
for crusher inlet 13 pc.
Quantity:
KLEEMANN MR 130 Z K024 1 - 299
for crusher inlet 14 pc.
Quantity:

Wear plates

Genuine KLEEMANN wear plates protect the high-quality crusher housing from damage.

Wear plates
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS 40 square 250 x 250 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS 40 rectangular 250 x 122.5 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS 50 triangular 246 x 246 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS 50 rectangular 250 x 122.5 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS 50 square 250 x 250 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS HW triangular 246 x 246 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS HW rectangular 250 x 122.5 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS HW square 250 x 250 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 R EVO K016 1 - 9999
KRS 40 triangular 246 x 246 x 20 cm for crusher housing
Quantity:
KLEEMANN MR 110 Z EVO K017 1 - 9999
KRS 40 square 250 x 250 x 20 cm for crusher housing
Quantity:

Due to possible technical changes, always refer to the information in the instruction manual.