GENERATION

Highlights

GENERATION round-shank picks are distinguished by unique product properties that above all enable users to significantly reduce their operating costs. Thanks to their adapted shank design and optimised carbide tip geometry with a reinforced carbide base, the picks in this product line are designed to withstand high impact loads and are therefore the ideal solution for recycling and soil stabilisation applications. The relatively large steel body volume compared to conventional picks and the reinforced wear plate deliver the longest possible service life for tools and optimum protection for the top part of the toolholders in applications involving abrasive materials.

Carbide tips with maximum fracture toughness
Steel body with optimised wear volume
Pick shanks with improved fracture toughness
Reinforced wear plate with optimised geometry
Reinforced version of the field-proven WIRTGEN clamping sleeve
Unique groove profile with innovative centring function
Carbide mix:

In combination with the reinforced carbide base, the carbide mix with a high cobalt content of 7% ensures outstanding durability of the carbide, even in situations with extremely high impact loads. In view of these unique properties, the universal picks of the GENERATION series are the ideal choice for all cold recycling and soil stabilisation applications.

The interplay of round-shank picks and the top part of toolholders

GENERATION universal round-shank picks also have a positive effect on the wearing of the upper parts of tool holders. The innovative centring function reduces lengthwise wear. The service life can be increased by over 25%, especially in the case of heavy-duty applications such as pulverisation.

  • Newly developed wear plate with groove profile provides proven improvement of centring and pick rotation.
  • Carbide assures long-term cutting capability and guarantees best possible carbide utilisation.
  • Better centring and rotation of the pick leads to a more than 25% increase in the service life of the round-shank pick toolholder.

Recommended uses

Soil stabilisation applications

Cohesive soils/milled material generally contain abrasive (grinding) materials that flow around the carbide tip and the pick head during the cutting process. In such cases, wear to the steel body dominates and therefore limits the service life of the pick. Here, the carbide tip plays an important role by deflecting material away from the steel body (pick head) and reducing its wear.

In the case of soils interspersed with rocks or boulders, it is advisable to use round-shank picks with a cylindrical tip (or a W6C tip). In this case, the fracture toughness of the carbide tip is the decisive factor, as suddenly occurring high impact forces must be deflected.

When the shanks of round-shank picks are subjected to extreme impact stresses due to larger rocks and boulders, the top parts of the toolholder system can be replaced to allow the use of round-shank picks with a shank diameter of 25 mm.

Cohesive soil

Slightly cohesive soil with small to medium pieces of rock

Extremely abrasive supplementary gravel.

Applications
Cold recycling and pulverising

In the course of road rehabilitation projects, the round-shank picks penetrate below the base layer or even deeper into the ground. Depending on the structure of the road surface and the materials / additives used, it must be assumed that a certain proportion of abrasive (grinding) stone with low grain size and sometimes tough binder course materials will be encountered. As high cutting forces are required when cutting such layers, it is advisable to use carbide tips with a higher cutting capability (e.g. W6). The size of the carbide tips used should be appropriately adapted as the abrasiveness of the material increases. The use of a cylindrical variant of the carbide tip is recommended when larger rocks or chunks are present.

Photo: Asphalt surface layer on a layer of small gravel

WIRTGEN cutting tools

Genuine cutting tools from WIRTGEN: order and buy round-shank picks and alternative cutting tools online.

> Cutting tools from WIRTGEN
The WIRTGEN Pick Finder

Quickly and easily find the right cutting tools for your road milling, cold recycling and soil stabilisation applications. Using the WIRTGEN Pick Finder helps you to lower your operating costs and increase the efficiency and performance of your machines.

Pick Finder
WIRTGEN cutting tools
Back to overview