KLEEMANN wear linings
KLEEMANN Resistance Steel (KRS) is available in three quality grades.
Highlights
Various versions
Thick-walled KRS plates
Composite wear plates
Interchangeable
Easy installation
Recommended use
| Wearing plate | Specification | Application |
|---|---|---|
| KRS.40 | Hardness: up to 430 HV | KRS.40, which provide high impact resistance, are highly recommended for materials with low abrasiveness, for example when crushing limestone or recycling mixed rubble and concrete. |
| KRS.50 | Hardness: up to 530 HV |
KRS.50 wear plates are recommended for crushing stone/rocks with medium abrasiveness and recycling. |
| KRS.60 | Hardness: up to 600 HV |
KRS.60 wear plates are particularly suited for crushing extremely abrasive materials and feed materials with uncrushable content (e.g. steel). |
| KRS.HW | Hardness: ~740 HV (hardfacing welded) |
KRS.HW wear plates are recommended when high abrasive wear is expected. The valuable crusher housing is completely lined with particularly wear-resistant plates to protect it against damage. Wear and tear within the housing can vary considerably during the crushing process. KLEEMANN offers a range of special hardfacing welded plates that extend replacement intervals and reduce wear-related costs. These assure you considerably longer service life than the standard plates from KLEEMANN. |
Wear plates for Kleemann crushing plants
The main wear zones of the various crusher types
Return to Parts Guide
> The Parts Guide