KLEEMANN wear linings


KLEEMANN Resistance Steel (KRS) is available in three quality grades.

Highlights
Various versions
Thick-walled KRS plates
Composite wear plates
Interchangeable
Easy installation
Recommended use
Wearing plate Specification Application
KRS.40 Hardness: up to 430 HV KRS.40, which provide high impact resistance, are highly recommended for materials with low abrasiveness, for example when crushing limestone or recycling mixed rubble and concrete.
KRS.50 Hardness: up to 530 HV KRS.50 wear plates are recommended for crushing stone/rocks with medium abrasiveness and recycling.
KRS.60 Hardness: up to 600 HV KRS.60 wear plates are particularly suited for crushing extremely abrasive materials
and feed materials with uncrushable content (e.g. steel).
KRS.HW Hardness: ~740 HV (hardfacing welded) KRS.HW wear plates are recommended when high abrasive wear is expected.
The valuable crusher housing is completely lined with particularly wear-resistant plates to protect it against damage. Wear and tear within the housing can vary considerably during the crushing process. KLEEMANN offers a range of special hardfacing welded plates that extend replacement intervals and reduce wear-related costs. These assure you considerably longer service life than the standard plates from KLEEMANN.
Wear plates for Kleemann crushing plants

The main wear zones of the various crusher types


Wear plates for hoppers & feeding units

Prescreen wear parts


KLEEMANN tool exchange Video instructions

Instructions on the installation and removal of crushing and screening tools.

Tool change
KLEEMANN wear linings

Genuine wear lining parts from KLEEMANN: order and buy rubber curtains, chain curtains and wearing plates online.

> KLEEMANN wear linings
Return to Parts Guide
> The Parts Guide