Crushing tools for cone crushers
The KX series of cone crushers are typically used as secondary and tertiary crushers. In this case, the material entering the crusher is crushed between the rigid crushing shell and the moving crushing cone.
To achieve consistently high performance and a long service life, the entire wear surface of the crushing tool must be used.
This can only be achieved if the crushing tools are selected to match the size of the material entering the crusher and the desired final product.
To achieve consistently high performance and a long service life, the entire wear surface of the crushing tool must be used.
This can only be achieved if the crushing tools are selected to match the size of the material entering the crusher and the desired final product.
150
Products found
Crushing shells and crushing cones
The crushing tools must achieve an optimum crushing result and a long service life, even at a high degree of utilisation. This is why different crushing tool combinations, material thicknesses and manganese steel qualities are available from KLEEMANN for varying application conditions.
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| SH-CONE.M.20 | Short Head | Medium | 20.3 MnCr |
| without anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| SH-CONE.F.20 | Short Head | Fine | 20.3 MnCr |
| without anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| S-CONE.C.20 | Standard | Coarse | 20.3 MnCr |
| with anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| S-CONE.M.20 | Standard | Medium | 20.3 MnCr |
| with anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| S-CONE.F.20 | Standard | Fine | 20.3 MnCr |
| with anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| SH-CONE.C.20 | Short Head | Coarse | 20.3 MnCr |
| with anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| SH-CONE.M.20 | Short Head | Medium | 20.3 MnCr |
| with anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| SH-CONE.F.20 | Short Head | Fine | 20.3 MnCr |
| with anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| SH-CONE.C.20 | Short Head | Coarse | 20.3 MnCr |
| without anti-spin |
Quantity:
| KLEEMANN | MCO 9 EVO | K072 | 1 - 9999 |
| S-CONE.F.20 | Standard | Fine | 20.3 MnCr |
| without anti-spin |
Quantity:
Due to possible technical changes, always refer to the information in the instruction manual.