Maintenance parts: Filter packages, maintainance packages, lubricants

Maintenance parts: Filter packages, maintainance packages, lubricants

Filling or lubricating your machine with a lubricant specially tailored to the application has a significant impact on the service life of the active parts in combustion engines, hydraulic components, gearboxes and bearings. WIRTGEN GROUP lubricants are optimised for your machine and therefore meet these special requirements perfectly. Combined with WIRTGEN GROUP filter sets and maintenance packages, our lubricants are the best choice to maintain the performance of your machine and permanently reduce maintenance costs.
Maintenance parts: Filter packages, maintainance packages, lubricants

Your selection: 3085 Products

Reset all filters
3085 Products found

Coolants

WIRTGEN GROUP coolants to protect against corrosion, overheating and frost.

Coolants
WIRTGEN W 35 DC 0403 400 - 9999
Filling capacity/total requirement: 6.5 l | Application: Coolant system 5 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 35 DC 0403 400 - 9999
Filling capacity/total requirement: 6.5 l | Application: Coolant system 208 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 35 DC 0403 400 - 9999
Filling capacity/total requirement: 6.5 l | Application: Coolant system 20 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Filling capacity/total requirement: 5.25 l | Application: Coolant system 5 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Filling capacity/total requirement: 5.25 l | Application: Coolant system 208 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Filling capacity/total requirement: 5.25 l | Application: Coolant system 20 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 500 0605 5 - 9999
Filling capacity/total requirement: 10 l | Application: Cooling system 5 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 500 0605 5 - 9999
Filling capacity/total requirement: 10 l | Application: Cooling system 208 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 500 0605 5 - 9999
Filling capacity/total requirement: 10 l | Application: Cooling system 20 l annually Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:
WIRTGEN W 50 1005 1 - 9999
Filling capacity/total requirement: 4.25 l | Application: Diesel engine 5 l see instruction manual Coolants to protect against corrosion, overheating and frost (not suitable for use in 09WR (WR 200i) or KLEEMANN machines).
Quantity:

Engine oils

The WIRTGEN GROUP offers a selection of engine oils for all the high-performance engines installed in our machines.

Engine oils
WIRTGEN W 35 DC 0403 1 - 399
5 l Filling capacity/total requirement: 11 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based multigrade engine oil designed for use in markets where fuel with a higher sulphur content is used (for example India, China, Africa, South America). Suitable for engines without exhaust aftertreatment (up to and including EU Stage 3a/US EPA Tier 3 exhaust emission standard). ACEA: E3, E5, E7 API: CI-4, CH-4, CG-4, CF-4, CF, SL CNH: MAT 3520 Global: DHD-1 JASO: DH-1 Caterpillar: ECF-2, ECF-1-A Cummins: CES 20078, 77, 76, 75, 72, 71 Detroit: DDC 93K215 Deutz: DQC III-10 IVECO: T1 Mack: EO-M+, EO-M MAN: M3275-1 Mercedes Benz: 228.3 MTU: Type 2 Renault: RLD-2 Volvo: VDS-3 Suitable for Euro 5 and older engines without diesel particulate filter.
Quantity:
WIRTGEN W 35 DC 0403 1 - 399
20 l Filling capacity/total requirement: 11 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based multigrade engine oil designed for use in markets where fuel with a higher sulphur content is used (for example India, China, Africa, South America). Suitable for engines without exhaust aftertreatment (up to and including EU Stage 3a/US EPA Tier 3 exhaust emission standard). ACEA: E3, E5, E7 API: CI-4, CH-4, CG-4, CF-4, CF, SL CNH: MAT 3520 Global: DHD-1 JASO: DH-1 Caterpillar: ECF-2, ECF-1-A Cummins: CES 20078, 77, 76, 75, 72, 71 Detroit: DDC 93K215 Deutz: DQC III-10 IVECO: T1 Mack: EO-M+, EO-M MAN: M3275-1 Mercedes Benz: 228.3 MTU: Type 2 Renault: RLD-2 Volvo: VDS-3 Suitable for Euro 5 and older engines without diesel particulate filter.
Quantity:
WIRTGEN W 35 DC 0403 1 - 399
208 l Filling capacity/total requirement: 11 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based multigrade engine oil designed for use in markets where fuel with a higher sulphur content is used (for example India, China, Africa, South America). Suitable for engines without exhaust aftertreatment (up to and including EU Stage 3a/US EPA Tier 3 exhaust emission standard). ACEA: E3, E5, E7 API: CI-4, CH-4, CG-4, CF-4, CF, SL CNH: MAT 3520 Global: DHD-1 JASO: DH-1 Caterpillar: ECF-2, ECF-1-A Cummins: CES 20078, 77, 76, 75, 72, 71 Detroit: DDC 93K215 Deutz: DQC III-10 IVECO: T1 Mack: EO-M+, EO-M MAN: M3275-1 Mercedes Benz: 228.3 MTU: Type 2 Renault: RLD-2 Volvo: VDS-3 Suitable for Euro 5 and older engines without diesel particulate filter.
Quantity:
WIRTGEN W 35 DC 0403 1 - 399
1,000 l IBC Filling capacity/total requirement: 11 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based multigrade engine oil designed for use in markets where fuel with a higher sulphur content is used (for example India, China, Africa, South America). Suitable for engines without exhaust aftertreatment (up to and including EU Stage 3a/US EPA Tier 3 exhaust emission standard). ACEA: E3, E5, E7 API: CI-4, CH-4, CG-4, CF-4, CF, SL CNH: MAT 3520 Global: DHD-1 JASO: DH-1 Caterpillar: ECF-2, ECF-1-A Cummins: CES 20078, 77, 76, 75, 72, 71 Detroit: DDC 93K215 Deutz: DQC III-10 IVECO: T1 Mack: EO-M+, EO-M MAN: M3275-1 Mercedes Benz: 228.3 MTU: Type 2 Renault: RLD-2 Volvo: VDS-3 Suitable for Euro 5 and older engines without diesel particulate filter.
Quantity:
WIRTGEN W 35 DC 0403 400 - 9999
5 l Filling capacity/total requirement: 9.5 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based multigrade engine oil designed for use in markets where fuel with a higher sulphur content is used (for example India, China, Africa, South America). Suitable for engines without exhaust aftertreatment (up to and including EU Stage 3a/US EPA Tier 3 exhaust emission standard). ACEA: E3, E5, E7 API: CI-4, CH-4, CG-4, CF-4, CF, SL CNH: MAT 3520 Global: DHD-1 JASO: DH-1 Caterpillar: ECF-2, ECF-1-A Cummins: CES 20078, 77, 76, 75, 72, 71 Detroit: DDC 93K215 Deutz: DQC III-10 IVECO: T1 Mack: EO-M+, EO-M MAN: M3275-1 Mercedes Benz: 228.3 MTU: Type 2 Renault: RLD-2 Volvo: VDS-3 Suitable for Euro 5 and older engines without diesel particulate filter.
Quantity:
WIRTGEN W 35 DC 0403 400 - 9999
20 l Filling capacity/total requirement: 9.5 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based multigrade engine oil designed for use in markets where fuel with a higher sulphur content is used (for example India, China, Africa, South America). Suitable for engines without exhaust aftertreatment (up to and including EU Stage 3a/US EPA Tier 3 exhaust emission standard). ACEA: E3, E5, E7 API: CI-4, CH-4, CG-4, CF-4, CF, SL CNH: MAT 3520 Global: DHD-1 JASO: DH-1 Caterpillar: ECF-2, ECF-1-A Cummins: CES 20078, 77, 76, 75, 72, 71 Detroit: DDC 93K215 Deutz: DQC III-10 IVECO: T1 Mack: EO-M+, EO-M MAN: M3275-1 Mercedes Benz: 228.3 MTU: Type 2 Renault: RLD-2 Volvo: VDS-3 Suitable for Euro 5 and older engines without diesel particulate filter.
Quantity:
WIRTGEN W 35 DC 0403 400 - 9999
208 l Filling capacity/total requirement: 9.5 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based multigrade engine oil designed for use in markets where fuel with a higher sulphur content is used (for example India, China, Africa, South America). Suitable for engines without exhaust aftertreatment (up to and including EU Stage 3a/US EPA Tier 3 exhaust emission standard). ACEA: E3, E5, E7 API: CI-4, CH-4, CG-4, CF-4, CF, SL CNH: MAT 3520 Global: DHD-1 JASO: DH-1 Caterpillar: ECF-2, ECF-1-A Cummins: CES 20078, 77, 76, 75, 72, 71 Detroit: DDC 93K215 Deutz: DQC III-10 IVECO: T1 Mack: EO-M+, EO-M MAN: M3275-1 Mercedes Benz: 228.3 MTU: Type 2 Renault: RLD-2 Volvo: VDS-3 Suitable for Euro 5 and older engines without diesel particulate filter.
Quantity:
WIRTGEN W 35 DC 0403 400 - 9999
1,000 l IBC Filling capacity/total requirement: 9.5 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based multigrade engine oil designed for use in markets where fuel with a higher sulphur content is used (for example India, China, Africa, South America). Suitable for engines without exhaust aftertreatment (up to and including EU Stage 3a/US EPA Tier 3 exhaust emission standard). ACEA: E3, E5, E7 API: CI-4, CH-4, CG-4, CF-4, CF, SL CNH: MAT 3520 Global: DHD-1 JASO: DH-1 Caterpillar: ECF-2, ECF-1-A Cummins: CES 20078, 77, 76, 75, 72, 71 Detroit: DDC 93K215 Deutz: DQC III-10 IVECO: T1 Mack: EO-M+, EO-M MAN: M3275-1 Mercedes Benz: 228.3 MTU: Type 2 Renault: RLD-2 Volvo: VDS-3 Suitable for Euro 5 and older engines without diesel particulate filter.
Quantity:
WIRTGEN W 35 Ri 0703 1 - 399
1,000 l IBC Filling capacity/total requirement: 10.2 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based engine oil with higher quality base oil, meets the viscosity requirements of all WIRTGEN GROUP machines with Cummins engines. For use in markets where low-sulphur fuel is used (e.g. Europe). Suitable for engines with exhaust gas aftertreatment (EU Stage 3b/US EPA Tier 4i exhaust emission standard and above). ACEA: E9, E7 API: CJ-4, CI-4+, CI-4, CH-4, CG-4, CF-4, CF CNH: MAT 3521, 3522 JASO: DH-2 Caterpillar: ECF-3, ECF-2 Cummins: CES 20081, 77, 72, 71 DDC: 93K218 Deutz: DQC III-10 LA IVECO: T2 E7 Renault: RLD-3 Mack: EO-O Premium Plus MAN: M3575 Mercedes Benz: 228.31 MTU: Type 2.1 Volvo: VDS-4, VDS-3 Suitable for the latest Euro 5 and US 2007 engines.
Quantity:
WIRTGEN W 35 Ri 0703 1 - 399
208 l Filling capacity/total requirement: 10.2 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h Mineral oil-based engine oil with higher quality base oil, meets the viscosity requirements of all WIRTGEN GROUP machines with Cummins engines. For use in markets where low-sulphur fuel is used (e.g. Europe). Suitable for engines with exhaust gas aftertreatment (EU Stage 3b/US EPA Tier 4i exhaust emission standard and above). ACEA: E9, E7 API: CJ-4, CI-4+, CI-4, CH-4, CG-4, CF-4, CF CNH: MAT 3521, 3522 JASO: DH-2 Caterpillar: ECF-3, ECF-2 Cummins: CES 20081, 77, 72, 71 DDC: 93K218 Deutz: DQC III-10 LA IVECO: T2 E7 Renault: RLD-3 Mack: EO-O Premium Plus MAN: M3575 Mercedes Benz: 228.31 MTU: Type 2.1 Volvo: VDS-4, VDS-3 Suitable for the latest Euro 5 and US 2007 engines.
Quantity:

Filter packages

WIRTGEN GROUP filter systems, which are designed to be perfectly compatible with our lubricants and operating agents, ensure that the systems remain clean and prevent damage to components, thus maximising the service life of your machines. The filter packages contain the engine and hydraulic filters required based on the machine type’s respective replacement interval. In order to ensure that the machine performs at its best, we recommend that you adhere to the specified replacement intervals.

Filter packages
WIRTGEN W 35 DC 0403 1 - 165
Motor 50 h 500 h; 1000 h
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
Hydraulics 1000 h
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
Hydraulics 50 h 500 h
Quantity:
WIRTGEN W 35 DC 0403 166 - 9999
Motor 500 h; 1000 h
Quantity:
WIRTGEN W 35 DC 0403 166 - 9999
Motor 50 h
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Motor 50 h
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Hydraulics 1000 h
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Hydraulics 50 h 500 h
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Motor 500 h
Quantity:
WIRTGEN W 500 0605 5 - 275
Motor 500 h; 1000 h
Quantity:

Gear oils

The WIRTGEN GROUP offers a wide selection of gear oils all designed to perfectly protect gearboxes and ensure that they run smoothly.

Gear oils
WIRTGEN W 35 DC 0403 1 - 9999
Filling capacity/total requirement: 0.9 l | Application: Advance drive gearbox 5 l 50 h 500 h
Mineral oil-based axle gear oil for WIRTGEN drive systems. Do not use for WIRTGEN milling drum gearboxes (except 2500 SM, 4200 SM), HAMM vibratory bearings and drum drives as well as VÖGELE pump splitter gearboxes and drive systems. API GL-5 MAN 342 type M1 MB release 235.0 Volvo 97310 US military MIL-L-2105B ZF TE-ML 16C, 17B, 19B, 21A
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
Filling capacity/total requirement: 0.9 l | Application: Advance drive gearbox 20 l 50 h 500 h
Mineral oil-based axle gear oil for WIRTGEN drive systems. Do not use for WIRTGEN milling drum gearboxes (except 2500 SM, 4200 SM), HAMM vibratory bearings and drum drives as well as VÖGELE pump splitter gearboxes and drive systems. API GL-5 MAN 342 type M1 MB release 235.0 Volvo 97310 US military MIL-L-2105B ZF TE-ML 16C, 17B, 19B, 21A
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
Filling capacity/total requirement: 0.9 l | Application: Advance drive gearbox 208 l 50 h 500 h
Mineral oil-based axle gear oil for WIRTGEN drive systems. Do not use for WIRTGEN milling drum gearboxes (except 2500 SM, 4200 SM), HAMM vibratory bearings and drum drives as well as VÖGELE pump splitter gearboxes and drive systems. API GL-5 MAN 342 type M1 MB release 235.0 Volvo 97310 US military MIL-L-2105B ZF TE-ML 16C, 17B, 19B, 21A
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
Filling capacity/total requirement: 7.5 l | Application: Milling drum gearbox 20 l 50 h 500 h
Exclusive fully synthetic gear oil designed for high-performance use in WIRTGEN milling drum gearboxes as well as KLEEMANN conveyor and bevel gearboxes. The high wettability of the lubricant ensures that the oil adheres well to gears and thus offers excellent wear protection. Do not use for HAMM vibratory bearings and drum drives. DIN 51517-3 (CLP) Approved by Bonfiglioli
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
Filling capacity/total requirement: 7.5 l | Application: Milling drum gearbox 208 l 50 h 500 h
Exclusive fully synthetic gear oil designed for high-performance use in WIRTGEN milling drum gearboxes as well as KLEEMANN conveyor and bevel gearboxes. The high wettability of the lubricant ensures that the oil adheres well to gears and thus offers excellent wear protection. Do not use for HAMM vibratory bearings and drum drives. DIN 51517-3 (CLP) Approved by Bonfiglioli
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
Filling capacity/total requirement: 7.5 l | Application: Milling drum gearbox 5 l 50 h 500 h
Exclusive fully synthetic gear oil designed for high-performance use in WIRTGEN milling drum gearboxes as well as KLEEMANN conveyor and bevel gearboxes. The high wettability of the lubricant ensures that the oil adheres well to gears and thus offers excellent wear protection. Do not use for HAMM vibratory bearings and drum drives. DIN 51517-3 (CLP) Approved by Bonfiglioli
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Filling capacity/total requirement: 0.9 l | Application: Advance drive gearbox 5 l 50 h 500 h
Mineral oil-based axle gear oil for WIRTGEN drive systems. Do not use for WIRTGEN milling drum gearboxes (except 2500 SM, 4200 SM), HAMM vibratory bearings and drum drives as well as VÖGELE pump splitter gearboxes and drive systems. API GL-5 MAN 342 type M1 MB release 235.0 Volvo 97310 US military MIL-L-2105B ZF TE-ML 16C, 17B, 19B, 21A
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Filling capacity/total requirement: 0.9 l | Application: Advance drive gearbox 20 l 50 h 500 h
Mineral oil-based axle gear oil for WIRTGEN drive systems. Do not use for WIRTGEN milling drum gearboxes (except 2500 SM, 4200 SM), HAMM vibratory bearings and drum drives as well as VÖGELE pump splitter gearboxes and drive systems. API GL-5 MAN 342 type M1 MB release 235.0 Volvo 97310 US military MIL-L-2105B ZF TE-ML 16C, 17B, 19B, 21A
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Filling capacity/total requirement: 0.9 l | Application: Advance drive gearbox 208 l 50 h 500 h
Mineral oil-based axle gear oil for WIRTGEN drive systems. Do not use for WIRTGEN milling drum gearboxes (except 2500 SM, 4200 SM), HAMM vibratory bearings and drum drives as well as VÖGELE pump splitter gearboxes and drive systems. API GL-5 MAN 342 type M1 MB release 235.0 Volvo 97310 US military MIL-L-2105B ZF TE-ML 16C, 17B, 19B, 21A
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
Filling capacity/total requirement: 7.5 l | Application: Milling drum gearbox 20 l 50 h 500 h
Exclusive fully synthetic gear oil designed for high-performance use in WIRTGEN milling drum gearboxes as well as KLEEMANN conveyor and bevel gearboxes. The high wettability of the lubricant ensures that the oil adheres well to gears and thus offers excellent wear protection. Do not use for HAMM vibratory bearings and drum drives. DIN 51517-3 (CLP) Approved by Bonfiglioli
Quantity:

Grease

The WIRTGEN GROUP offers grease products of the highest quality to reliably lubricate your components and provide a high level of protection against wear and tear, thus reducing maintenance requirements.

Grease
WIRTGEN W 35 DC 0403 1 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 500 0605 5 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 50 0805 1 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 50 1005 1 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 50 DC 0905 1 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 50 DCi 1205 1 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual

Filling capacity/total requirement: 9 l | Application: Diesel engine | First service: 50 h | Replacement interval: 500 h
Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 50 R 1405 5 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 50 Ri 1505 5 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:
WIRTGEN W 50 H 1305 1 - 9999
400 g Application: Lubrication points (general) | Replacement interval: see instruction manual Mineral oil-based grease for lubricating high-load or shock-loaded bearings in damp, unfavourable conditions. Suitable for lubrication points with mixed friction, rough surfaces and as assembly grease (for example joint pins, wheel bearings). Not suitable for ball bearings and polished surfaces. Operating temperature from -25 °C to +120 °C. DIN 51825/51826: KPF2K-20
Quantity:

Hydraulic oils

You will find a selection of WIRTGEN GROUP hydraulic oils for efficient power transmission here.

Hydraulic oils
WIRTGEN W 35 DC 0403 1 - 9999
20 l Filling capacity/total requirement: 55 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for moderate temperatures. DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
1,000 l IBC Filling capacity/total requirement: 55 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for moderate temperatures. DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 35 DC 0403 1 - 9999
208 l Filling capacity/total requirement: 55 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for moderate temperatures. DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
20 l Filling capacity/total requirement: 41 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for moderate temperatures. DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
1,000 l IBC Filling capacity/total requirement: 41 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for moderate temperatures. DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
208 l Filling capacity/total requirement: 41 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for moderate temperatures. DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 500 0605 5 - 9999
208 l Filling capacity/total requirement: 180 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for high temperatures (subtropics, tropics). DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 500 0605 5 - 9999
20 l Filling capacity/total requirement: 180 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for high temperatures (subtropics, tropics). DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 50 0805 1 - 9999
20 l Filling capacity/total requirement: 80 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for moderate temperatures. DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:
WIRTGEN W 50 0805 1 - 9999
1,000 l IBC Filling capacity/total requirement: 80 l | Application: Hydraulic oil tank | Replacement interval: 1000 h Multigrade hydraulic oil suitable for moderate temperatures. DIN 51524 part 2 HLP type for HLP 32 clutch fluid / Part 3 HVLP type for HVLP 32-68 ISO 11158 (HM) for HLP 32 clutch fluid / (HV) for HVLP 32-68 ASTM 6158-05 (HM) for HLP 32 clutch fluid / (HV) for HVLP Bosch Rexroth RD 90220-01 (2011), ISO 22-100 for HLP 32 clutch fluid, ISO 22-46 for HVLP 32 / ISO 32-68 for HVLP 46 and 68 Denison hydraulic systems (HF-0, HF-1, HF-2) Eaton Vickers (brochure 694) Fives Cincinnati P-68 (ISO 32) for HLP 32 and HVLP 32 clutch fluid / P-70 (ISO 46) for HVLP 46 / P-69 (ISO 68) for HVLP 68 GB 111181-1-94 (HM) for HLP 32 clutch fluid / (HV) for HVLP Swedish Standard SS 15 54 34 AM
Quantity:

Maintenance packages

Genuine WIRTGEN GROUP maintenance packages are our comprehensive all-round package and contain all the air, fuel, engine oil and hydraulic filters as well as lubricants, oils and seals required for the machine’s first service or the specified replacement interval, depending on the machine type (with the exception of hydraulic oil). In order to ensure that the machine performs at its best, we recommend that you adhere to the specified replacement intervals.

Maintenance packages
WIRTGEN W 35 DC 0403 1 - 165
50 h 500 h
Quantity:
WIRTGEN W 35 DC 0403 1 - 165
1000 h
Quantity:
WIRTGEN W 35 DC 0403 166 - 9999
50 h 500 h
Quantity:
WIRTGEN W 35 DC 0403 166 - 9999
1000 h
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
1000 h
Quantity:
WIRTGEN W 35 Ri 0703 1 - 9999
50 h 500 h
Quantity:
WIRTGEN W 500 0605 5 - 275
250 h
Quantity:
WIRTGEN W 500 0605 5 - 275
1000 h
Quantity:
WIRTGEN W 500 0605 5 - 275
500 h
Quantity:
WIRTGEN W 500 0605 5 - 275
50 h
Quantity:

Other lubricants

Here you will find other important components for filling and lubricating your machine – to ensure it enjoys a long service life.

WIRTGEN W 200 Fi 2120 1 - 9999
Diesel engine 95 l 10 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN W 200 Fi 2120 1 - 9999
Diesel engine 95 l 210 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN W 207 Fi 2120 1 - 9999
Diesel engine 95 l 210 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN W 207 Fi 2120 1 - 9999
Diesel engine 95 l 10 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN SP 124i 19SP 1 - 9999
Diesel engine 95 l 210 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN SP 124i 19SP 1 - 9999
Diesel engine 95 l 10 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN SP 124i US 19SP 1 - 9999
Diesel engine 95 l 210 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN SP 124i US 19SP 1 - 9999
Diesel engine 95 l 10 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN SP 124 Li 19SP 1 - 9999
Diesel engine 95 l 10 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:
WIRTGEN SP 124 Li 19SP 1 - 9999
Diesel engine 95 l 210 l see instruction manual
AdBlue® is a registered trademark of the Association of the Automotive Industry (Verband der Automobilindustrie e. V.; VDA) 32.5% high-purity diesel exhaust fluid according to DIN 70070 / ISO 22241.
Quantity:

Due to possible technical changes, always refer to the information in the instruction manual.