Crushing tools for cone crushers

Quickly and easily buy genuine crushing tools for KLEEMANN cone crushers online.

The KX series of cone crushers are typically used as secondary and tertiary crushers. In this case, the material entering the crusher is crushed between the rigid crushing shell and the moving crushing cone.

To achieve consistently high performance and a long service life, the entire wear surface of the crushing tool must be used.

This can only be achieved if the crushing tools are selected to match the size of the material entering the crusher and the desired final product.

Please check your entry.

with anti-spin
without anti-spin

18.2 MnCr
20.3 MnCr

Please check your entry.

Crushing shells and crushing cones

The crushing tools must achieve an optimum crushing result and a long service life, even at a high degree of utilisation. This is why different crushing tool combinations, material thicknesses and manganese steel qualities are available from KLEEMANN for varying application conditions.

crushing cone | 2599925

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Short Head	Application Fine; Medium; Coarse	Version SH-CONE 20
Manganese version Content 20.3 MnCr	Tool type KX200; KX250	Minimum gap width 10 mm - 25 mm	Minimale Spaltweite bis [mm] 25 mm
Minimale Spaltweite von [mm] 10 mm	Feed opening 71 mm - 142 mm	Einlauföffnung bis [mm] 142 mm	Einlauföffnung von [mm] 71 mm

Quantity:

crushing cone | 2295676

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Short Head	Application Fine; Medium; Coarse	Version SH-CONE 18
Manganese version Content 18.2 MnCr	Tool type KX200; KX250	Minimum gap width 10 mm - 25 mm	Minimale Spaltweite bis [mm] 25 mm
Minimale Spaltweite von [mm] 10 mm	Feed opening 71 mm - 142 mm	Einlauföffnung bis [mm] 142 mm	Einlauföffnung von [mm] 71 mm

Quantity:

crushing cone | 2450546

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Standard	Application Fine; Medium; Coarse	Version S-CONE 20
Manganese version Content 20.3 MnCr	Tool type KX200; KX250	Minimum gap width 16 mm - 45 mm	Minimale Spaltweite bis [mm] 45 mm
Minimale Spaltweite von [mm] 16 mm	Feed opening 116 mm - 199 mm	Einlauföffnung bis [mm] 199 mm	Einlauföffnung von [mm] 116 mm

Quantity:

crushing cone | 2295672

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Standard	Application Fine; Medium; Coarse	Version S-CONE 18
Manganese version Content 18.2 MnCr	Tool type KX200; KX250	Minimum gap width 16 mm - 45 mm	Minimale Spaltweite bis [mm] 45 mm
Minimale Spaltweite von [mm] 16 mm	Feed opening 116 mm - 199 mm	Einlauföffnung bis [mm] 199 mm	Einlauföffnung von [mm] 116 mm

Quantity:

crushing shell | 2450551

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Standard	Application Fine	Version S-CONE F 20
Manganese version Content 20.3 MnCr	Tool type KX200; KX250	Minimum gap width 16 mm - 32 mm	Minimale Spaltweite bis [mm] 32 mm
Minimale Spaltweite von [mm] 16 mm	Feed opening 116 mm - 131 mm	Einlauföffnung bis [mm] 131 mm	Einlauföffnung von [mm] 116 mm

Quantity:

crushing shell | 2599959

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Short Head	Application Medium	Version SH-CONE M 20
Manganese version Content 20.3 MnCr	Tool type KX200; KX250	Minimum gap width 10 mm - 22 mm	Minimale Spaltweite bis [mm] 22 mm
Minimale Spaltweite von [mm] 10 mm	Feed opening 99 mm - 111 mm	Einlauföffnung bis [mm] 111 mm	Einlauföffnung von [mm] 99 mm

Quantity:

crushing shell | 2599960

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Short Head	Application Fine	Version SH-CONE F 20
Manganese version Content 20.3 MnCr	Tool type KX200; KX250	Minimum gap width 10 mm - 19 mm	Minimale Spaltweite bis [mm] 19 mm
Minimale Spaltweite von [mm] 10 mm	Feed opening 71 mm - 80 mm	Einlauföffnung bis [mm] 80 mm	Einlauföffnung von [mm] 71 mm

Quantity:

crushing shell | 2369191

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Short Head	Application Medium	Version SH-CONE M 18
Manganese version Content 18.2 MnCr	Tool type KX200; KX250	Minimum gap width 10 mm - 22 mm	Minimale Spaltweite bis [mm] 22 mm
Minimale Spaltweite von [mm] 10 mm	Feed opening 99 mm - 111 mm	Einlauföffnung bis [mm] 111 mm	Einlauföffnung von [mm] 99 mm

Quantity:

crushing shell | 2369178

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Short Head	Application Fine	Version SH-CONE F 18
Manganese version Content 18.2 MnCr	Tool type KX200; KX250	Minimum gap width 10 mm - 19 mm	Minimale Spaltweite bis [mm] 19 mm
Minimale Spaltweite von [mm] 10 mm	Feed opening 71 mm - 80 mm	Einlauföffnung bis [mm] 80 mm	Einlauföffnung von [mm] 71 mm

Quantity:

crushing shell | 2450548

Brand KLEEMANN	Series code MCO 9 EVO	Serial code K072	Serial number range 1 - 9999
Type with anti-spin; without anti-spin	Crushing tool type Standard	Application Coarse	Version S-CONE C 20
Manganese version Content 20.3 MnCr	Tool type KX200; KX250	Minimum gap width 25 mm - 45 mm	Minimale Spaltweite bis [mm] 45 mm
Minimale Spaltweite von [mm] 25 mm	Feed opening 179 mm - 199 mm	Einlauföffnung bis [mm] 199 mm	Einlauföffnung von [mm] 179 mm

Quantity:

KLEEMANN tool exchange Video instructions

Instructions on the installation and removal of crushing and screening tools.

Tool exchange

Crushing tools for cone crushers

Our portfolio of cone crushers is large and extremely varied. With the help of our Parts Guide, you can find out exactly which tools are the right choice for your cone crusher and your specific application.

To the Parts Guide

Due to possible technical changes, always refer to the information in the instruction manual.