Original WIRTGEN scrapers not only seal the milling chamber so that the milled material can be conveyed away cleanly, but also smooth the milled surface. Type 1 scrapers are optimised to slide as smoothly as possible over the milled surface when scraping. In contrast, the modified shape, profile and position of the carbide in the type 2 version leads to a stronger scraping effect.
Type 1 | 500 mm |
Type 1 | 500 mm |
Type 1 | 500 mm |
Type 1 | 500 mm |
Type 1 | 500 mm |
Type 1 | 600 mm |
Type 1 | 500 mm |
Type 1 | 500 mm |
Type 1 | 600 mm |
Type 1 | 500 mm |
WIRTGEN wear protection segments are made of particularly wear-resistant material. They not only protect the milling drum housing from normal wear and tear, but are also easy to replace.
4 pc. | Milling width: 500 mm 4 pc. | Milling width: 600 mm |
welded |
left | Milling width: 500 mm left | Milling width: 600 mm |
welded |
left | Milling width: 500 mm left | Milling width: 600 mm |
4 pc. | Milling width: 500 mm 4 pc. | Milling width: 600 mm |
welded |
left | Milling width: 500 mm left | Milling width: 600 mm |
welded |
left | Milling width: 500 mm left | Milling width: 600 mm |
50 mm | 490 mm |
2 pc. | Milling width: 1000 mm 2 pc. | Milling width: 1200 mm 2 pc. | Milling width: 1300 mm |
welded |
left | Milling width: 1200 mm left | Milling width: 1300 mm |
welded |
right | Milling width: 1000 mm right | Milling width: 1200 mm right | Milling width: 1300 mm |
welded | left | Milling width: 1000 mm |
Due to possible technical changes, always refer to the information in the instruction manual.