Milling drum housings

Milling drum housings

Order and buy genuine scrapers and wear protection segments for WIRTGEN milling drum housings online.

The WIRTGEN milling drum housing contains the heart of your machines: the milling drum fitted with cutting tools.

In addition to the wear protection segments to protect the side plates, genuine WIRTGEN tungsten carbide scrapers on the rear rotor plate ensure that as little milled material as possible remains on the milled surface when the material is transported away via the conveyor unit system. This results in less cleaning work and a levelled milled surface. Thanks to perfectly harmonised components, milling drum housings from WIRTGEN offer maximum reliability and minimum machine downtimes in day-to-day operations on the construction site.
Milling drum housings
Please check your entry.
271 Products found

Scraper

Original WIRTGEN scrapers not only seal the milling chamber so that the milled material can be conveyed away cleanly, but also smooth the milled surface. Type 1 scrapers are optimised to slide as smoothly as possible over the milled surface when scraping. In contrast, the modified shape, profile and position of the carbide in the type 2 version leads to a stronger scraping effect.

Scraper
Type 1 500 mm
Quantity:
Type 1 500 mm
Quantity:
Type 1 500 mm
Quantity:
Type 1 500 mm
Quantity:
Type 1 500 mm
Quantity:
Type 1 600 mm
Quantity:
Type 1 500 mm
Quantity:
Type 1 500 mm
Quantity:
Type 1 600 mm
Quantity:
Type 1 500 mm
Quantity:

Wear protection segments

WIRTGEN wear protection segments are made of particularly wear-resistant material. They not only protect the milling drum housing from normal wear and tear, but are also easy to replace.

Wear protection segments
4 pc. | Milling width: 500 mm

4 pc. | Milling width: 600 mm
Quantity:
Material depressor
welded left | Milling width: 500 mm

left | Milling width: 600 mm
Quantity:
welded left | Milling width: 500 mm

left | Milling width: 600 mm
Quantity:
4 pc. | Milling width: 500 mm

4 pc. | Milling width: 600 mm
Quantity:
Material depressor
welded left | Milling width: 500 mm

left | Milling width: 600 mm
Quantity:
welded left | Milling width: 500 mm

left | Milling width: 600 mm
Quantity:
50 mm 490 mm 2 pc. | Milling width: 1000 mm

2 pc. | Milling width: 1200 mm

2 pc. | Milling width: 1300 mm
Quantity:
Material depressor
welded left | Milling width: 1200 mm

left | Milling width: 1300 mm
Quantity:
welded right | Milling width: 1000 mm

right | Milling width: 1200 mm

right | Milling width: 1300 mm
Quantity:
welded left | Milling width: 1000 mm
Quantity:

Due to possible technical changes, always refer to the information in the instruction manual.