Tools

Tools

Order and buy reliable genuine tools from VÖGELE online.

Nothing is more important than the reliability of your machine. Whether in the workshop or directly on the construction site, with special tools from VÖGELE you always have the right tool at hand for the appropriate maintenance job. Sophisticated technology and ease of use are the hallmarks of these many small helpers in day-to-day construction site operations.
Tools
20 Products found

Other tools

Other tools such as various metering units and special nuts round off the portfolio. With VÖGELE tools, you can quickly and easily maintain your machines yourself.

VÖGELE To measure the frequency, the frequency meter (sirometer) is held against a machine’s housing while it is in operation and the meter displays the number of revolutions per minute (in increments of 1000). The lower scale displays the number of vibrations per second, i.e. in hertz.
Quantity:
Frequency meter
VÖGELE Length: 4 m, can be folded down to 1 m, 90 x 18 mm, without bubbles.
Quantity:
Level
VÖGELE For measuring the asphalt thickness during the paving process.
Quantity:
Paving thickness measuring unit
VÖGELE For loosening and tightening the locking nut on hydraulic rams for pressure bars.
Quantity:
Special nut for hydraulic rams for pressure bars

Service case

With VÖGELE service cases, you have everything you need to carry out minor maintenance tasks quickly and easily on your own.

Service case
VÖGELE This kit contains all of the standard parts needed to quickly repair an electrical failure.
Quantity:
Electrical service kit
VÖGELE This box contains a comprehensive range of O-rings for sealing leaks in the hydraulic system.
Quantity:
O-Ring box
VÖGELE This vehicle tool kit is designed specifically for our machines and is something no machine should be without. It can be stowed easily, even in smaller compartments, and is always ready to use.
Quantity:
On-board tools
VÖGELE Set of screwdrivers and pliers, crimping pliers, various switches, sensors and relays, digital measuring tools (clamp ammeter, digital hand-held tachometer, infrared thermometer, megohmmeter, multimeter), pressure gauge and much more.
Quantity:
Service tool kit
VÖGELE Benefit from our tool kit and maintain the operational readiness of your machine.
Quantity:
Toolbox

Tools for electrical systems

From the infrared temperature measuring device to the megaohmmeter to the test lead set – VÖGELE’s tools for electrical systems offer everything you need to respond quickly in the event of unforeseen failures.

Tools for electrical systems
VÖGELE For measuring AC and DC current 0.3 to 700 A, AC and DC voltage 0 to 750 V, frequency 0.5 to 9999 Hz, resistance 0 to 4 kΩ, continuity testing, belt pouch included.
Quantity:
Clip-on ammeter
VÖGELE For fitting 0.5 – 2.5 mm² crimp connectors. 0.5 – 2.5 mm²
Quantity:
Crimping pliers
VÖGELE To disassemble the ring of crimp connectors.
Quantity:
Disassembly tool for crimp connectors
VÖGELE for crimp connectors Extractor for loosening the star ring of crimp connectors.
Quantity:
Extraction tool
VÖGELE Multimeter for measuring voltage, amperes, ohms and hertz.
Quantity:
Fluke multimeter
VÖGELE digital Universal measuring device for measuring rotational speed, velocity and length. Non-contact measurement via reflex marking. Contact measurement with clip-on adapter.
Quantity:
Hand-held tachometer
VÖGELE Non-contact measurement via infrared sensor. With adjustable emission level for measuring the temperature of different surfaces. Infrared and contact measurement in one device. Includes belt clip and batteries.
Quantity:
Infrared temperature measuring unit
VÖGELE For finding insulation faults in the heating system and for ohm measurements.
Quantity:
Megaohmmeter
VÖGELE Test leads, test prods and crocodile clips for the for the megohmmeter.
Quantity:
Test lead set

Tools for hydraulic systems

No service vehicle is complete without VÖGELE’s hydraulic tools for repairing hydraulic components.

Tools for hydraulic systems
VÖGELE This case should not be missing from any service vehicle or workshop. It features a well-organized assortment of cutting rings, union nuts, Minimess fittings, SAE fittings as well as all of the standard fittings.
Quantity:
Hydraulic fittings kit
VÖGELE When working on the hydraulic system, it is extremely important to prevent oil from leaking. The vacuum pump can be used to create a vacuum in the air cavity above the hydraulic oil, which significantly minimises oil loss. For creating a stable pressure level in the hydraulic system, thus enabling repair work without a loss of oil – preventing environmental pollution. For leak testing the hydraulic system.
Quantity:
Vacuum pump

Due to possible technical changes, always refer to the information in the instruction manual.